Saturday, November 1, 2014

Lowongan Kerja Rekind WorleyParsons

Rekind WorleyParsonsRekind WorleyParsons, a Joint Operation between two big companies in Engineering, Procurement & Construction (WorleyParsons and PT Rekayasa Industri) which runs a multimillion dollar contract with Chevron Pacific Indonesia.

WorleyParsons and its 50/50 joint venture partner PT Rekayasa Industri have been awarded a significant Improve contract by PT Chevron Pacific Indonesia. The contract is for the supply of overall program management, engineering and construction management services for Chevron’s oilfield assets spread through the middle of Sumatra. The contract will provide estimated revenue of USD180 million to the joint venture partners over its

Rekind WorleyParsons is looking for candidates with relevant skills and experiences in EPC industry :

1. LEAD PROCESS ENGINEER
Work Location: Jakarta

Responsibilites
• Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
• Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary
• Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services
• Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period.

Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
o Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
o Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
o Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
• The candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.

2. SENIOR PROCESS ENGINEER
Work Location: Jakarta

Roles and Responsibilities
• Prepare and complete process engineering design, coordinate Contractors activities in development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required to support Companys related projects
• Work closely with Companys user(s) during review sessions of deliverables
• Provide mentoring on related process engineering aspects to Contractors Process Engineers to enhance their competency to provide risk management (safety and reliability) services to the various RekindWorleyParsons Safety & Risk Management clients.
• To be responsible to the performance of projects assigned to both in terms of technical capability and also commercial performance of the project.
• To promote RekindWorleyParsons Safety & Risk Management to clients to achieve follow-on work with existing clients and new work with prospective clients.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• Address and co-ordinate safety in Design requirements.
• Perform Inherent Safety Review.
• Knowledge of HAZOP workshops, Fire & Explosion Analysis, Fire Protection related studies and Formal Safety assessments.
• Identify Safety Critical Element & Performance Standards.
• Identify Design Requirements for Safety Systems.
• Perform Risk Assessment Studies including QRA, FERA, ESSA, F&G, Dropped Object,
• Perform Loss Prevention Studies includes Hazardous Area Classification, EERA.
• Perform fire water system design including fire water demand calculations and steady-state fire water network hydraulic modelling
• Have a sound understanding of Active and Passive Fire Protection Design
• Estimation of work scopes & CTR.
• The candidate shall have thorough knowledge on process engineering and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• The candidate shall have high mentoring & coaching skills.

3. SENIOR DESIGN ENGINEER PIPING
Work Location: Jakarta

Responsibilites:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.

Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
The candidate shall have high mentoring & coaching skills.

4. SENIOR DESIGN ENGINEER MECHANICAL
Work Location: Jakarta

Responsibilites:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.

Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API610, API676, ASME-VIII Division 1/2, API650, etc.
• The candidate shall have high mentoring & coaching skills.

5. DESIGN ENGINEER ELECTRICAL
Work Location: Jakarta

Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.

6. DESIGN ENGINEER PIPING (Layout and Material)
Work Location: Jakarta

Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.

7. DESIGN ENGINEER INSTRUMENTATION & CONTROL
Work Location: Jakarta

Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.

Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.

8. DRAFTER PIPING
Work Location: Jakarta

Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractors Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.

9. DRAFTER CIVIL AND STRUCTURAL
Work Location: Jakarta

Roles and Responsibilities
• Development of design drawings by using CADD in accordance with their function and objective as directed by Contractors Designer.

Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) or equivalent, with 2 years working experience or senior high school graduate (SMU) with 4 years working experience, both in design drafting by using CADD.
• Minimum 1 year of which (with D3 degree) or 2 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.

All applications are appreciated and will be treated confidentially. Only qualified, short-listed applicants will be invited for further process. If you find that your skill meet the requirement please send your resume in PDF to lica.rizawaty@rekindworleyparsons.com & ayu.anindita@rekindworleyparsons.com with the title of applied position as email subject. Please dont attach other document besides your own resume.


Product reviews and advice for best reference

No comments:

Post a Comment