With over 30 years’ experience, Air Energi are the premier supplier of trusted expertise to the oil and gas industry. Headquartered in Manchester UK, Air Energi has regional hubs in Houston, Doha, Singapore and Brisbane. We have offices in 35 locations worldwide, experience of supply for 50 countries worldwide, and through our company values: Safe, knowledgeable, innovative, passionate, inclusive, and pragmatism, WE DELIVER, each and every time.
Currently we are seeking qualified candidates for below positions:
1. Quantity Surveyor
• Above 5 years of working experience
• Rotational schedule 6 weeks on-site – 1 week off
• Has a good understanding on below matters:
o Electrical installation (10 person)
o Instrument installation (10 person)
o Structural installation (10 person)
o Piping installation (10 person)
2. Commissioning Supervisor - Electrical (Location - Indonesia)
Responsibilities:
1 Work under the direction of the Lead Electrical Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline
2 Apply and share with team members experience and lessons learned from previous Projects
3 Input of relevant information to the Completions Management System for the Electrical discipline
4 Be conversant with check sheet Completion and Management
5 Develop supporting Commissioning documentation and conversant with IT application
6 Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
7 Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
8 Ensure commissioning safety and that any incidents and near misses are reported
9 Ensure commissioning activities are implemented in accordance with the projects Operations Permit to Work system
10 Prepare daily reports re: progress and commissioning / materials / logistics issues.
11 Verify commissioning is completed and documented in accordance with approved commissioning procedures
12 Perform all Pre-Commissioning and Commissioning function tests relevant to the Mechanical discipline
13 Interface with other discipline Commissioning Engineers to commission systems as required
14 Liaise with Operations on issues of commissioning implementation
15 Raise permits to work prior to submission to Permit Controller
16 Verify mechanical completion, pre-commissioning and commissioning activities
17 Assist with Preparation of all certification documents for completion and hand-over to Operations.
18 Ensure commissioning is in accordance with approved commissioning procedures
Experience, Skill & Capabilities Required:
• Minimum Diploma Degree in Engineering
• 15 years of experience in Electrical
• 5 years of experience as Commissioning Supervisor.
• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Electrical Equipment systems and their interaction with other systems.
• Ability to read Schematics and Single Line Diagram
• Good understanding of the completions/certification documentation process
• Competent IT skills are necessary for the use of Microsoft Office software.
• Able to speak English
• Can work under pressure
3. Commissioning Supervisor – Instrumentation (Location - Indonesia)
Responsibilities:
1 Work under the direction of the Lead Instrument Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline.
2 Apply and share with team members experience and lessons learned from previous Projects
3 Input of relevant information to the Completions Management System for the Instrument discipline
4 Be conversant with check sheet Completion and Management
5 Develop supporting Commissioning documentation and conversant with IT application
6 Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
7 Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
8 Ensure commissioning safety and that any incidents and near misses are reported
9 Ensure commissioning activities are implemented in accordance with the projects Operations Permit to Work system
10 Prepare daily reports re: progress and commissioning / materials / logistics issues.
11 Verify commissioning is completed and documented in accordance with approved commissioning procedures
12 Perform all Pre-Commissioning and Commissioning function tests relevant to the Instrument discipline
13 Interface with other discipline Commissioning Engineers to commission systems as required
14 Liaise with Operations on issues of commissioning implementation
15 Raise permits to work prior to submission to Permit Controller
16 Verify mechanical completion, pre-commissioning and commissioning activities
17 Assist with Preparation of all certification documents for completion and hand-over to Operations.
18 Ensure commissioning is in accordance with approved commissioning procedures
Experience, Skill & Capabilities Required:
• Minimum Diploma Degree in Engineering
• 15 years of experience in Instrumentation Discipline
• 5 years of experience as Commissioning Supervisor.
• Experience in Lead team of technicians during commissioning and start-up in the discipline of Instrumentation
• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Electrical Equipment systems and their interaction with other systems.
• Ability to read Schematics and Single Line Diagram
• Good understanding of the completions/certification documentation process
• Competent IT skills are necessary for the use of Microsoft Office software.
• Able to speak English
• Can work under pressure
4. Commissioning Supervisor - Mechanical (Location - Indonesia)
Responsibilities:
1 Work under the direction of the Lead Mechanical Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline.
2 Apply and share with team members experience and lessons learned from previous Projects
3 Input of relevant information to the Completions Management System for the Mechanical discipline
4 Be conversant with check sheet Completion and Management
5 Develop supporting Commissioning documentation and conversant with IT application
6 Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
7 Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
8 Ensure commissioning safety and that any incidents and near misses are reported
9 Ensure commissioning activities are implemented in accordance with the projects Operations Permit to Work system
10 Prepare daily reports re: progress and commissioning / materials / logistics issues.
11 Verify commissioning is completed and documented in accordance with approved commissioning procedures
12 Perform all Pre-Commissioning and Commissioning function tests relevant to the Mechanical discipline
13 Interface with other discipline Commissioning Engineers to commission systems as required
14 Liaise with Operations on issues of commissioning implementation
15 Raise permits to work prior to submission to Permit Controller
16 Verify mechanical completion, pre-commissioning and commissioning activities
17 Assist with Preparation of all certification documents for completion and hand-over to Operations.
18 Ensure commissioning is in accordance with approved commissioning procedures
Experience, Skill & Capabilities Required:
• Minimum Diploma Degree in Engineering
• 15 years of experience in Mechanical Discipline
• 5 years of experience as Commissioning Supervisor.
• Experience in Lead team of technicians during commissioning and start-up in the discipline of Mechanical
• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Electrical Equipment systems and their interaction with other systems.
• Ability to read Schematics and Single Line Diagram
• Good understanding of the completions/certification documentation process
• Competent IT skills are necessary for the use of Microsoft Office software.
• Able to speak English
• Can work under pressure
5. Instrument/Automation Engineer – Contract for 6 month
Minimum Requirements:
• Degree in Mechanical / Electrical/Electronics/Instrumentation Engineer
• 3 – 5 years experience in automation/instrumentation engineering in an oil & gas operator, EPC company or instrumentation vendor
• Experience across design, installation and maintenance of downstream depot operations (at least one minimum)
• Have Skill Conversant with standards for custody transfer system (e.g. ASME/ANSI/API/ISO/AGA/GPA)
• Understanding of the basic design of Oil field/depot automation and the processes
• Fluent in English
• General Business Skill (e.g. communications, reporting, budgeting) a plus
6. Technical Sales
• Bachelor degree in Petroleum Engineering
• Having 3 – 5 years experiences related with any of the services given for Oil & Gas companies - Drilling Engineer - Petroleum, etc.
• Good command of English
• Skills to communicate and create relationship with people.
RESPONSIBILITIES:
• Sells our clients products and services through engineered, value based solutions.
• Builds high-quality, lasting technical relationship, guided by a strong understanding of customer situations
• Connects customer ideas with product development organization and predicts future applications and products
• Discovers opportunities, adds value to customer operations, proves differentiation.
• Offers value added services (string design, running services, inspection, etc.) as an empowered member of the customer team.
• Assists a team, and at times leads the customer investigation and claims management process
• Provides a technical support role.
7. Senior Reservoir Engineer
The Senior Reservoir Engineer must have sound knowledge of all technical practices and principles within reservoir engineering: reservoir performance analysis, optimization of fields, development planning, economic evaluation, forecasting of production, and reserve evaluation. Must be able to apply manage multiple concurrent projects, work in a team environment, and be able to communicate openly and candidly.
Job Description, Knowledge & Skills
• Gather reservoir data, performs analyses and calculations, and applies models to characterize reservoir or field properties
• Perform economic evaluations, field evaluation, field development planning, decline curve analysis
• Manage and optimize producing assets from a Reservoir perspective
• Develop reservoir performance predictions. Prepare estimates of in-place hydrocarbon volume
• Perform surveillance, analysis and make recommendations on subsurface engineering required for proper reservoir management of assets
• Support reservoir and production due diligence on potential farm-ins and acquisitions
• Understand and support efforts to mitigate risk
Education & Experience
• BS in Petroleum Engineering or other Engineering degree with appropriate professional experience
• Min 15 years related experience in oil and gas exploration and production.
• Ability to function independently and in a team.
• Excellent spoken and written communication skills.
8. Senior Geologist Exploration
Job Description, Knowledge & Skills
• Experience mainly in exploration, petroleum system, with some new venture and production exposure
• Generate prospects and leads with geological risk and reserve calculation
• Resources calculation (REP or others)
• Understand petrophysic analysis
• Computer literate/savvy, includes Kingdom, GS/Petrolog, Trinity/PetroMod, ArcGIS preferrably and other exploration softwares
Education & Experience
• BS in Geology or other Engineering degree with appropriate professional experience
• Min 12 years related experience in oil and gas exploration and production.
• Ability to function independently and in a team.
• Excellent spoken and written communication skills (Bahasa and English)
9. Day Company Man
Responsibilities
• As the RSES of the Rig Site and 500 m around rig to respect with personnel protection, environmental protection and safeguarding assets
• Have the leadership on the rig to improve the performance of operations in respect of the HSE policies, Code of Conduct, Standard Operating Procedures (SOP) and Company Rules
• Organize rig operations in order to deliver and maintain wells on the rig location as per company objectives & work program through a continual search for the improving equipment, services and operational procedures
• Validate information and report to office in order to guarantee the output produced in good quality and in time
• Mentoring night drilling supervisor in order to ensure proper handling of operations
Requirements:
• Bachelor degree or equivalent preferably in Petroleum or Mechanical Engineering
• Well control IWCF certification is compulsory (supervisor level & sub-sea combined) every 2 yrs.
• BOSIET training is compulsory with refresher every 4 years
• More than 5 years experiences in well construction operations
• Knowledge of drilling/completion operations, Onshore and offshore drilling rigs, Specific related fields, Safety persons and installations, SIMOPS, Well and environmental safety.
10. Drilling Superintendent
Responsibilities
• Plan and control the swamp rig operations in order to respect the HSE Policies/procedures and Company referential
• Lead and control the swamp rig operations to ensure that the wells are delivered as per programs
• Review and evaluate the swamp rigs operations in order to improve the performance through a continual search for the improving equipment, services and operational procedures
• Validate information and report for other entities and management to guarantee the output produced in good quality and in time
• Plan and execute human resources management and development programs within service in order to reach optimum competency of each personnel required by the post and to motivate them to achieve organizations objectives
Requirements:
• Diploma Degree in Petroleum Engineering or Mechanical Engineering
• Well Control IWCF certification is compulsory (supervisor level and sub-sea combined) every two years
• BOSIETtraining is compulsory with refresher every 4 years
• Minimum with 15 years professional experience of well construction operations in different environment, preferably with 3-5 years experience at drilling supervisor level with international exposure
• Extensive knowledge of offshore drilling/completion operations and previous RSES experience in SIMOPSoperations
If you have the required experience and would like the opportunity to join with us, please email your application to: indonesia.recruitment@airenergi.com
No comments:
Post a Comment